Add Some Shimmer To Your Space DIY With A Lighted Branch Screen

This DIY lighted branch room divider screen is cozy and beautiful.  This project will take a little time but it will be worth it.  It will provide some ambient lighting for a more relaxing environment.  You could even use this on a porch, deck, or balcony.  Grab a glass of wine and enjoy!  Thanks to Tip Junkie for the great idea.

You Will Need…

  • 6 – 24″ long 1″x3″ pine boards
  • 6 – 60″ long 1″x3″ pine boards
  • 24 -1 1/4″ wood screws
  • 18 – 3/4″ wood screws
  • Drill
  • 4 – 2″ long hinges
  • Thick galvanized wire
  • Wire cutters
  • Americana Decor Chalky Finish in Rustic and Serene
  • Paintbrush
  • Wax
  • Sanding block
  • 12 – 60″ long branches
Just a Tip!

Instructions

  • Step 1: Create four 24″ x 60″ frames by connecting each corner with two 1 1/4″ long wood screws Connect the frames together using the 2″ long hinges *make sure that the frames are in a zigzag pattern Drill three screws on the top and bottom of each frame leaving 1/4″ sticking out.

 

d00b720009b1e6a643b5ff730bc74e4b

Images from Tip Junkie.

For the full instructions visit Tip Junkie.

Leave a Reply